September 24, 2019
Colter & Peterson will demonstrate three new machines at the upcoming Print Show. Learn why customers are having success these machines.
August 20, 2019
Colter & Peterson will feature three new products at PRINT 19. Learn more about their plans for this year’s show.
May 29, 2019
A Wisconsin hybrid in-plant printing operation is answering a higher calling with its new PRISM paper cutter.
May 15, 2019
Here’s a story about how a Michigan university’s busy in-plant operation is succeeding with its new PRISM paper cutter.
April 29, 2019
A Pennsylvania printer’s long term relationship with C&P helped immensley when faced with a recent emergency.
February 28, 2019
When Slade Print bought a new PRISM® cutter from Colter & Peterson last year, they knew the heavy duty paper cutting machine was needed. What they didn’t know is how much it would affect their business—both increasing their offerings and giving them greater cutting efficiency.
December 20, 2018
The fourth quarter in any football game is the most critical period, the one where decision making can win or lose the game. It’s the same for many printers such as Karr Graphics in New York City. Faced with a tough decision heading into their busiest time of the year, Larry Karr made a great call. He bought a new 36-inch PRISM® paper cutter with Microcut® from Colter & Peterson that has produced winning results since October.
November 28, 2018
Higher education is all about learning and preparing for a better future. Operating them can be challenging, especially smaller public institutions since fiscal responsibility is almost always paramount. That was a major factor when the digital print shop at the College of Central Florida struck gold by installing a new PRISM® 73H paper cutter with Microcut® from Colter & Peterson six months ago.
May 10, 2018
Working is a small and successful print shop often requires employees to know most if not all of the equipment, rolling up their sleeves and doing whatever it takes to get the job done. The crew at Bourne Brothers in Hattiesburg, MS know the drill.
May 10, 2018
Scott Ruple knew productivity would increase at Bourne Brothers once installation of a new 36-inch PRISM® paper cutter with Microcut® from Colter & Peterson was completed.
February 10, 2018
Nearly two years ago, Detroit area digital print provider Avanzado (www.avzdo.com) had two aging Baum 31.5-inch paper cutters being fed more work on a daily basis. They replaced one with a compact yet heavy duty 36-inch PRISM® from Colter & Peterson,
November 27, 2017
Good things come in small packages, and the staff at Alexander Clark Printing in Boise, ID know it’s true. Last summer they had to replace a small size paper cutter that had to fit a constricted space. Some research and a recommendation from a local dealer led them to selecting a new PRISM® P80 with Microcut® electronics. The dynamic 30-inch paper cutter from Colter & Peterson has so far delivered a boatload of positive results since being installed in early September.
February 28, 2017
Look around Philadelphia and areas throughout New Jersey and chances are good you’ll find BC&B Graphics’ work. The Pennsauken, NJ full service printer is the go-to source for high profile customers, and they also perform on the national stage for prominent casino clients. Playing at that level requires the best, which is why they went all-in for a second time with another reconditioned 45” PRISM® paper cutter from Colter & Peterson.
February 27, 2017
With shrinking budgets more commonplace these days for taxing bodies of government, state agencies are not immune to shortfalls or equipment snafus. Mike Pobega, Deputy Director and Production Manager of the New York City Human Resources Administration’s print shop, knows this too well.
August 18, 2016
Small companies serve as the backbone of U.S. business, so count Valley Die Cutting among them. The New Jersey company started in a garage over 50 years ago, is experiencing a growth phase that led owner John Dwyer to make some critical decisions.
March 09, 2016
In less than 12 years, Avanzado has grown to become one of the largest minority-owned digital print and communication solution providers in the Midwest. They did so by developing and expanding a next generation Automated Marketing Platform (AMP) with print sales to service a Who’s Who corporate client roster.
January 21, 2016
The rigid structure of the U.S. Air Force helped lead Dan Wallace down the path of success. It provided a solid foundation that after gaining valuable experience in the printing business, he started Wallace Printing from his garage in Newton, North Carolina in 1989. Faced with a need to replace a 30-year-old paper cutter, Dan did his homework and found the answer. In early December, a new 36” Prism® paper cutter with Microcut® from Colter & Peterson was installed. He couldn’t be happier with the early results.
July 30, 2015
Business has blossomed for Adams Direct & Media Services and their direct mail side is attracting larger size clients. That growth has triggered various equipment upgrades – including the back-end operation – with the purchase from Colter & Peterson of a 30” PRISM® paper cutter in 2012 and a recently added 31.5” PRISM, both outfitted with the Microcut® computer control system.
June 17, 2015
Since purchasing an Accutrim HD1680 three-knife trimmer in January 2014, business at G&H Soho Inc. at times has resembled a stock market bull run. The New Jersey digital book printer strategically got in front of the curve to handle new business, and owners Jim Harris and Gerry Burstein are hoping to catch lightning in a bottle a second time.